Lacks of beans indicator still flashes even there are coffee beans inside the container.
Possible Cause：Internal coffee grounds outlet is blocked.
Solution：
-Follow the steps of Manual Rinsing to clean the coffee grounds outlet.
Internal drip tray is filled with water.
Possible Cause：Ground coffee is too fine which block the water to come out.
Solution：
-Adjust the grind size to coarser level.
There is no alert when the water tank is removed or the water level in tank is low.
Possible Cause：The area near the water tank connector is wet.
Solution：
-Wipe the water around the water tank connector.
The appliance takes long time to heat up.
Possible Cause：Excessive scale has built up.
Solution：
-Descale the appliance.
Coffee has no cream.
Possible Cause：Coffee beans are not fresh.
Solution：
-Use fresh coffee beans.
Quality of the first cup of coffee is poor.
Possible Cause：The first run of grinder does not deliver sufficient quantity ground coffee into the brewing unit.
Solution：
-Make another cup of coffee, the quality will be improved.
The coffee cannot come out from spout.
Possible Cause：Empty system function might be used before.
Solution：
-Press the hot water button until the water can come out from the spout.
The coffee is not hot enough.
Possible Cause：The cups have been preheated.The brewer is too cold.
Solution：
-Warm the cups.
-Rinse the appliance at least 3 times before making the coffee.
No or delayed response in several trials of pressing the function keys on panel.
Possible Cause：The appliance is under Electromagnetic Interference.
There is dirt on control panel.
Solution：
-Unplug the appliance from power socket. Restart after a few minutes.
Clean the panel with soft cloth.
The appliance does not work.
Possible Cause：The appliance is not connected to the main supply.
Solution：
-Plug in and press the Power ON/OFF button.
-Check the cord and the plug.
